4250/4350 Laser Cable
Description / 4250/4350 Laser Cable
Product Information
HP RM1-1198-000CN Laser/Scanner Interconnect Cable - Refurbished Outright
Part Number: RM1-1198-000CN-RO
Condition: Refurbished Outright. No core return required.
Manufacturer / Brand: HP
Refurbished laser/scanner interconnect cable for HP LaserJet 4250 / 4350 series printers. Match the exact component and installed wiring before replacement.
Technical Specifications
| Listed part number | RM1-1198-000CN-RO |
|---|---|
| Component | Laser/Scanner Interconnect Cable |
| HP part reference | RM1-1198-000CN |
| Printer family | HP LaserJet 4250 / 4350 |
| Circuit | Laser/scanner to DC-controller interconnect; J83/J84 connection checks apply to the laser/scanner circuit |
| Catalog part references | RM1-1198-000CN |
Commonly Used to Fix
These manufacturer-documented checks are suggested repair paths. Confirm the exact model, operating voltage and failed component before replacement.
| Error code / light pattern | Meaning and applicable printer models | Checks / how this part may fix it |
|---|---|---|
| 51.XY | HP diagnostic pattern: X=1 beam-detect error; X=2 laser error. Retain the reported XY suffix. HP LaserJet 4250 / 4350. | Press Select, then turn the printer off and on. Power off before checking the laser/scanner-to-DC-controller connectors at J83/J84. Reseat and inspect the interconnect. Replace this exact cable only when a wiring/connector fault is confirmed; scanner and DC-controller faults are alternative causes in the documented service sequence. |
| 52.XY | HP diagnostic pattern: X=0 scanner error; X=1 scanner startup error; X=2 scanner rotation error. Retain the reported XY suffix. HP LaserJet 4250 / 4350. | Press Select, then turn the printer off and on. Power off before checking the laser/scanner-to-DC-controller connectors at J83/J84. Reseat and inspect the interconnect. Replace this exact cable only when a wiring/connector fault is confirmed; scanner and DC-controller faults are alternative causes in the documented service sequence. |
Other Symptoms This Part May Fix
- Sharp random lines or unstable beam output: Inspect the scanner/DC-controller interconnect and reseat its connectors before replacing the scanner or boards. A cable repair applies only when diagnosis identifies a connection or cable fault.
- Distorted printed images: Reseat scanner and DC-controller cables; media, environment, scanner, worn gears, cartridge motor and DC controller can also cause the symptom.
- Black pages: Inspect and reseat scanner-to-DC-controller connectors. Replace the cable only if necessary after confirming its fault; cartridge and high-voltage/laser circuitry are other causes.
- Blank pages: Rule out software/network separator pages, multiple feeds, sealing tape, cartridge, shutter, transfer and high-voltage faults. The manufacturer also identifies a defective laser/scanner cable and directs cable replacement when confirmed.
Used In Products
Warranty
90 days, provided by seller
More Information
| Manufacturer | HP |
|---|---|
| Condition | Refurbished |
| Part Number | RM1-1198-000CN-RO |
| OEM Part Number | RM1-1198-000CN |
| Alternate Part Numbers | RM1-1198-000CN |
Write Your Own Review
✓ FREE SHIPPING on Printer Parts Orders over $100 and Specified Toners within the continental USA