HP LaserJet 4250/4350 Tray 1 Input Assembly

All items come with standard warranty of 90 days, warranty provided by seller.

In stock

Only 11 left

Part Number
RM1-1097-000CN-RO
$15.00

Description / HP LaserJet 4250/4350 Tray 1 Input Assembly

Product Information

HP RM1-1097-000CN Tray 1 Pickup Assembly - Refurbished Outright

Part Number: RM1-1097-000CN-RO

Condition: Refurbished Outright. No core return required.

Manufacturer / Brand: HP

Tray 1 paper-pickup assembly for HP LaserJet 4250 / 4350 printers. Match RM1-1097-000CN and the exact installed pickup mechanism before replacement.

Technical Specifications

Listed part numberRM1-1097-000CN-RO
ComponentTray 1 paper-pickup assembly
HP service referenceRM1-1097-000CN
Printer familyHP LaserJet 4250 / 4350
FunctionTray 1 pickup drive and media pickup mechanism
Service distinctionPickup roller, separation pad and pickup solenoid have separate service references; diagnose the failed component before replacing the assembly

Commonly Used to Fix

These manufacturer-documented checks are suggested repair paths. Confirm the exact model, operating voltage and failed component before replacement.

Error code / light patternMeaning and applicable printer modelsChecks / how this part may fix it
13.01.00Media did not reach pre-feed sensor PS102 within the specified time; confirm the actual source and fault location.
HP LaserJet 4250 / 4350; apply only after isolating the fault to Tray 1.
Use HELP and remove jammed media. Check the actual source tray and its paper-present sensing first. Clean the pickup roller and replace a worn or damaged roller; inspect feed/separation rollers and correct PS102 installation. Follow the manufacturer pickup-solenoid check before replacing the complete Tray 1 pickup assembly. For Tray 1 SL102, disconnect J79 and check approximately 110 ohms on the cable side; replace a failed solenoid separately. The complete assembly is a suggested repair when its own drive gears or pickup mechanism are defective. Paper-feed assembly, PS103 and DC-controller faults remain separate alternatives.
13.03.00Media did not reach top-of-page sensor PS103 within the specified time; confirm Tray 1 pickup is the faulty stage.
HP LaserJet 4250 / 4350; apply only after isolating the fault to Tray 1.
Use HELP and remove jammed media. Check the actual source tray and its paper-present sensing first. Clean the pickup roller and replace a worn or damaged roller; inspect feed/separation rollers and correct PS102 installation. Follow the manufacturer pickup-solenoid check before replacing the complete Tray 1 pickup assembly. For Tray 1 SL102, disconnect J79 and check approximately 110 ohms on the cable side; replace a failed solenoid separately. The complete assembly is a suggested repair when its own drive gears or pickup mechanism are defective. Paper-feed assembly, PS103 and DC-controller faults remain separate alternatives.
13.XX.YY JAMManufacturer grouped jam pattern; this row concerns a confirmed Tray 1 pickup fault.
HP LaserJet 4250 / 4350; apply only after isolating the fault to Tray 1.
Clear media, verify loading and inspect the pickup roller and separation pad before ordering an assembly. Clean contaminated parts and replace only worn or damaged components where practical. Inspect the Tray 1 pickup drive gears; the manufacturer directs pickup-assembly replacement for damaged gears or a defective assembly. Check SL102 at J79 for approximately 110 ohms for these models; the separate solenoid, feed-roller clutch and DC controller require their own tests and are not automatically repaired by this part.

Other Symptoms This Part May Fix

  • Tray 1 repeatedly fails to pick paper or jams at pickup: Check proper loading and remove debris. Clean the pickup roller and separation pad; replace worn or damaged individual parts first. Inspect the pickup drive gears. Replace the complete pickup assembly when its gears are damaged or the assembly is defective. Verify the pickup solenoid separately and distinguish faults in the feed roller clutch, paper-feed assembly, sensing or DC controller.

Used In Products

HP LaserJet 4250 series
HP LaserJet 4350 series

Warranty

90 days, provided by seller

More Information

Manufacturer HP
Condition Refurbished
Part Number RM1-1097-000CN-RO
OEM Part Number RM1-1097-000CN
Alternate Part Numbers RM1-1097-000CN
Weight 7.000000
Write Your Own Review
You're reviewing: HP LaserJet 4250/4350 Tray 1 Input Assembly

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

✓ FREE SHIPPING on Printer Parts Orders over $100 and Specified Toners within the continental USA