Power Supply 220V

All items come with standard warranty of 90 days, warranty provided by seller.

Out of stock

Only 1 left

Part Number
RM1-1071-000CN-RO
$0.00

Description / Power Supply 220V

Product Information

HP RM1-1071-000CN Power Supply Assembly (220-240 V) - Refurbished Outright

Part Number: RM1-1071-000CN-RO

Condition: Refurbished Outright. No core return required.

Manufacturer / Brand: HP

Refurbished power supply assembly (220-240 v) for HP LaserJet 4250 / 4350 series printers. Match the exact component and printer voltage before replacement.

Technical Specifications

Listed part numberRM1-1071-000CN-RO
ComponentPower Supply Assembly (220-240 V)
HP service-manual referenceRM1-1071-000CN
Printer familyHP LaserJet 4250 / 4350
Rated printer input220-240 V; verify printer rating
FunctionPrinter high-voltage and low-voltage power-supply assembly
Catalog part referencesRM1-1071-000CN

Commonly Used to Fix

These manufacturer-documented checks are suggested repair paths. Confirm the exact model, operating voltage and failed component before replacement.

Error code / light patternMeaning and applicable printer modelsChecks / how this part may fix it
49.24.02Critical printer error with a specific ribbon-cable/power-supply/controller/formatter isolation path.
HP LaserJet 4250 / 4350. 220-240 V printer power-supply configuration only.
Power off and verify that the ribbon cables are fully seated at the DC-controller connectors. If the fault remains, the manufacturer directs replacement of the power supply, then the DC controller, then the formatter. Select this power supply only for the correct220-240Vrated printer.
50.1Low fuser temperature.
HP LaserJet 4250 / 4350; 220-240 V printer power-supply configuration only.
Turn off and allow the printer to cool. Verify the correct fuser model and voltage; reseat it and inspect its printer connection, replacing a damaged connector. Replace a confirmed faulty fuser, then the DC controller if necessary. The power-supply assembly is the subsequent documented service step; use only the correct printer-rated voltage.
50.2Fuser warm-up service error.
HP LaserJet 4250 / 4350; 220-240 V printer power-supply configuration only.
Turn off and allow the printer to cool. Verify the correct fuser model and voltage; reseat it and inspect its printer connection, replacing a damaged connector. Replace a confirmed faulty fuser, then the DC controller if necessary. The power-supply assembly is the subsequent documented service step; use only the correct printer-rated voltage.
50.3Fuser over-temperature.
HP LaserJet 4250 / 4350; 220-240 V printer power-supply configuration only.
Turn off and allow the printer to cool. Verify the correct fuser model and voltage; reseat it and inspect its printer connection, replacing a damaged connector. Replace a confirmed faulty fuser, then the DC controller if necessary. The power-supply assembly is the subsequent documented service step; use only the correct printer-rated voltage.
50.4Faulty fuser.
HP LaserJet 4250 / 4350; 220-240 V printer power-supply configuration only.
Turn off and allow the printer to cool. Verify the correct fuser model and voltage; reseat it and inspect its printer connection, replacing a damaged connector. Replace a confirmed faulty fuser, then the DC controller if necessary. The power-supply assembly is the subsequent documented service step; use only the correct printer-rated voltage.
50.5Incorrect fuser installed.
HP LaserJet 4250 / 4350; 220-240 V printer power-supply configuration only.
Turn off and allow the printer to cool. Verify the correct fuser model and voltage; reseat it and inspect its printer connection, replacing a damaged connector. Replace a confirmed faulty fuser, then the DC controller if necessary. The power-supply assembly is the subsequent documented service step; use only the correct printer-rated voltage.
50.6Open fuser circuit.
HP LaserJet 4250 / 4350; 220-240 V printer power-supply configuration only.
Turn off and allow the printer to cool. Verify the correct fuser model and voltage; reseat it and inspect its printer connection, replacing a damaged connector. Replace a confirmed faulty fuser, then the DC controller if necessary. The power-supply assembly is the subsequent documented service step; use only the correct printer-rated voltage.
57.4Left-side main cooling fan F1 error.
HP LaserJet 4250 / 4350; 220-240 V printer power-supply configuration only.
Power off; reconnect the fan-to-power-supply connector and fully seat the DC-controller ribbon cables. Replace a faulty left fan if necessary. If unresolved, the documented sequence continues with the power supply, then the DC controller.
58.2Ambient air-temperature sensor error.
HP LaserJet 4250 / 4350; 220-240 V printer power-supply configuration only.
Turn the printer off and on. Power off and reconnect the air-temperature sensor to the power supply at J63. Replace a confirmed faulty air-temperature sensor first. The power-supply assembly is the subsequent documented step.
58.4Power-supply error.
HP LaserJet 4250 / 4350; 220-240 V printer power-supply configuration only.
The manufacturer directs replacement of the power-supply assembly. Confirm the exact printer and220-240Vrated configuration before selecting this part.
INSTALL CARTRIDGEPrint cartridge absent or not correctly installed; persistent detection fault may have other causes.
HP LaserJet 4250 / 4350; 220-240 V printer power-supply configuration only.
Install and fully seat the correct cartridge; replace it if the condition persists. Inspect the connectors between the power supply and transfer assembly for damage. Replace the power-supply assembly only if the fault remains after those checks.
INSTALL FUSERFuser absent or not correctly installed.
HP LaserJet 4250 / 4350; 220-240 V printer power-supply configuration only.
Install or reseat the fuser and push it in until both blue side levers click into place. If unresolved, replace the fuser, then the DC controller. The power-supply assembly is the subsequent documented service step.
REPLACE CARTRIDGECartridge supply warning; a persistent fault after cartridge replacement has a separate service path.
HP LaserJet 4250 / 4350; 220-240 V printer power-supply configuration only.
Replace the print cartridge first and follow the printer help instructions. If the error persists after those steps, the manufacturer lists replacement of the power-supply assembly. This board is not a substitute for an empty cartridge.

Other Symptoms This Part May Fix

  • No power or main fan not starting: Check the active wall outlet, correct mains voltage, power cord and power-switch position first. If the protection circuit has tripped, wait more than two minutes before restarting. Have the SW1 switch andFU1/FU2fuses checked during service. Power off before disconnecting the formatter and optional accessories to isolate loading; inspect the fan connection and test the fan before replacing the power supply or DC controller as indicated.
  • Light print: Use the half self-test and check toner, EconoMode, density, media, transfer roller, high-voltage springs and laser shutter. A defective high-voltage supply is a documented possible cause after those checks.
  • Dots along the paper path: Check static-eliminator cleanliness and its power-supply contacts, then transfer-roller condition. The power supply is a possible cause when those items are sound.
  • Dropouts or character voids: Check media/fuser settings, transfer roller and high-voltage contacts to the cartridge/transfer assembly. A defective power supply with low transfer voltage is one documented possible cause.
  • Grey background: Check media/environment, toner-density and high-transfer settings, cartridge and high-voltage connector springs. A defective power supply is another documented possible cause.
  • Black pages: Check cartridge and high-voltage springs, then the DC-controller/high-voltage interconnect. Replace a confirmed defective power supply before the DC controller in that circuit path; laser/scanner or scanner cables are separate alternatives.
  • Blank pages: Rule out software/network separator pages, multiple feeds, cartridge sealing tape/empty cartridge, shutter, transfer-roller voltage, contacts and drum ground. A defective high-voltage circuit can require power-supply replacement; a failed laser cable is a separate possibility.
  • Excessively dark print: Check toner density, cartridge drum life, media and high-voltage contacts. A defective power supply or laser/scanner is another possible cause; replace only the component isolated by diagnosis.

Used In Products

HP LaserJet 4250 series
HP LaserJet 4350 series

Warranty

90 days, provided by seller

More Information

Manufacturer HP
Condition Refurbished
Part Number RM1-1071-000CN-RO
OEM Part Number RM1-1071-000CN
Alternate Part Numbers RM1-1071-000CN
Write Your Own Review
You're reviewing: Power Supply 220V

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

✓ FREE SHIPPING on Printer Parts Orders over $100 and Specified Toners within the continental USA