4250 Solenoid (Rk2-0270)
Description / 4250 Solenoid (Rk2-0270)
Product Information
HP RK2-0269-000CN Tray 2 Pickup Solenoid SL101 - Refurbished Outright
Part Number: RK2-0269-000CN-RO
Condition: Refurbished Outright. No core return required.
Manufacturer / Brand: HP
Pickup solenoid SL101 for Tray 2. Match the exact part and pickup position before ordering. Diagnosis must distinguish a failed solenoid from worn rollers, sensing faults or a damaged pickup mechanism.
Technical Specifications
| Listed part number | RK2-0269-000CN-RO |
|---|---|
| Component | Tray 2 pickup solenoid |
| HP service reference | RK2-0269-000CN |
| Solenoid designation | SL101 |
| 4250/4350 diagnostic connection | J92 at the DC controller; approximately 110 ohms on the cable side |
| Printer families | HP LaserJet 4240n / 4250 / 4350; HP LaserJet M4345 MFP |
| HP documented replacement direction | RK2-0269-000CN is replaced by RK2-0270-000CN; this listing retains the offered RK2-0269 reference. |
Commonly Used to Fix
These manufacturer-documented checks are suggested repair paths. Confirm the exact model, operating voltage and failed component before replacement.
| Error code / light pattern | Meaning and applicable printer models | Checks / how this part may fix it |
|---|---|---|
| 13.01.00 | Media did not arrive at the pre-feed sensor PS102 within the specified time. HP LaserJet 4240n / 4250 / 4350; diagnose the actual Tray 2 pickup solenoid SL101. | Clear the actual jam and verify media loading and sensing first. Inspect the pickup/feed/separation rollers and replace confirmed worn parts before condemning the solenoid. For a pickup fault traced to Tray 2, turn printer power off and disconnect the pickup-solenoid connector at DC-controller J92. For the 4250/4350, measure approximately 110 ohms between the cable-side connectors; replace the solenoid if this test fails. Do not substitute the approximately 160 ohm test for the older 4200/4300. A damaged pickup drive, feed clutch, lifter/stack sensor or DC controller needs separate diagnosis. |
| 13.03.00 | Media did not arrive at the top-of-page sensor PS103 within the specified time. HP LaserJet 4240n / 4250 / 4350; diagnose the actual Tray 2 pickup solenoid SL101. | Clear the actual jam and verify media loading and sensing first. Inspect the pickup/feed/separation rollers and replace confirmed worn parts before condemning the solenoid. For a pickup fault traced to Tray 2, turn printer power off and disconnect the pickup-solenoid connector at DC-controller J92. For the 4250/4350, measure approximately 110 ohms between the cable-side connectors; replace the solenoid if this test fails. Do not substitute the approximately 160 ohm test for the older 4200/4300. A damaged pickup drive, feed clutch, lifter/stack sensor or DC controller needs separate diagnosis. |
| 13.XX.YY JAM | Manufacturer grouped pickup/feed jam pattern; apply only to a fault isolated to this solenoid. HP LaserJet 4240n / 4250 / 4350; diagnose the actual Tray 2 pickup solenoid SL101. | Clear the actual jam and verify media loading and sensing first. Inspect the pickup/feed/separation rollers and replace confirmed worn parts before condemning the solenoid. For a pickup fault traced to Tray 2, turn printer power off and disconnect the pickup-solenoid connector at DC-controller J92. For the 4250/4350, measure approximately 110 ohms between the cable-side connectors; replace the solenoid if this test fails. Do not substitute the approximately 160 ohm test for the older 4200/4300. A damaged pickup drive, feed clutch, lifter/stack sensor or DC controller needs separate diagnosis. |
Other Symptoms This Part May Fix
- Pickup timing or actuation failure traced to Tray 2 solenoid SL101: On the 4250/4350, follow the manufacturer J92 cable-side resistance test after inspecting rollers, wiring and the actual pickup mechanism. On the M4345 MFP, this solenoid activates the corresponding pickup roller; use Administration > Troubleshooting > Component Test to observe or listen to the selected component. A feed-roller clutch, worn roller, sensing fault or damaged drive requires its own repair. Do not replace this solenoid solely because a paper-jam message appears.
Used In Products
HP LaserJet 4240n
HP LaserJet 4250 series
HP LaserJet 4350 series
HP LaserJet M4345 MFP
Warranty
90 days, provided by seller
More Information
| Manufacturer | HP |
|---|---|
| Condition | Refurbished |
| Part Number | RK2-0269-000CN-RO |
| OEM Part Number | RK2-0269-000CN |
| Alternate Part Numbers | RK2-0269-000CN, RK2-0270-000CN, RH7-5354-000CN, RH7-5355-000CN, RM1-5054-000CN |
| Weight | 0.500000 |
| UPC/EAN | 4053162857971 |
Write Your Own Review
✓ FREE SHIPPING on Printer Parts Orders over $100 and Specified Toners within the continental USA