HP LaserJet 5025MFP 5035MFP Maintenance Kit 110V - Refurbished Q7832A
Description / HP LaserJet 5025MFP 5035MFP Maintenance Kit 110V - Refurbished Q7832A
Product Information
HP LaserJet 5025MFP 5035MFP Maintenance Kit 110V - Refurbished
Part Number: Q7832A-RO
Refurbished Outright — no defective core return required.
Manufacturer: HP
Kit Contents
| Qty | Component | Component part number |
|---|---|---|
| 1 | Fuser assembly 110V | RM1-3007 |
| 1 | Transfer roller | RM1-2485 |
| 1 | Tray 1 pickup roller | RL1-0915 |
| 1 | Tray 1 separation pad | RM1-2462 |
| 2 | Cassette pickup assemblies | RM1-2988 |
| 2 | Separation block assemblies | RM1-2983 |
| 6 | Feed/separation rollers | RM1-0037 |
Refurbished fuser with new compatible replacement rollers and feed components. Contents and quantities match the OEM maintenance-kit configuration.
Technical Specifications
- Part number / SKU: Q7832A-RO
- Part type: Maintenance kit
- Voltage specified in listing: 110V
- Condition stated in listing: Refurbished
Confirm the printer model and exact part number before ordering. Kit contents and service life vary by listing; contact us if you need those details confirmed.
Common Symptoms
- Fuser temperature or warm-up faults corresponding to the model-specific codes listed above.
- Toner smears or does not bond properly to paper when the fuser is worn or faulty.
- Repeating marks, ghosting, or wrinkling caused by fuser wear.
Used In Products
Standard Kit Contents & Service Notes
The Q7832A original 110V maintenance kit family contains a fuser, transfer roller, paper pickup/feed rollers and separation pads. Confirm the actual components in this refurbished kit.
Printer Error Codes & Problems Addressed
Worn fuser or feed components may cause poor toner adhesion, paper-feed jams and other documented mechanical symptoms. Check the exact machine service fault code before ordering. Maintenance messages are not the same as a confirmed fuser electrical fault, and this kit is not a guaranteed repair for unrelated faults.
Reference: Part and compatibility documentation
Commonly Used to Fix
| Exact code | Meaning and diagnostic checks |
|---|---|
| 50.1 | Low fuser temperature; inspect power and temperature regulation. |
| 50.2 | Low temperature during fuser warm-up; inspect heater and electrical connections. |
| 50.3 | High fuser temperature; inspect thermistor and control circuitry. |
| 50.4 | Fuser or power-supply fault; verify source voltage and related electronics. |
| 50.5 | Wrong fuser installed; verify exact model and voltage. |
| 50.6 | Open fuser circuit or damaged heating element; inspect connections and fuser. |
| 50.7 | Fuser pressure-release mechanism failure; check mechanism and drive. |
| 50.8 | Low fuser temperature detected by sub-thermistor; check sensor and control. |
| 50.9 | High fuser temperature detected by sub-thermistor; check sensor and control. |
A fuser service code is not always caused by the fuser alone: verify model and voltage, power circuits, sensors and connectors before replacing components. Model service reference.
Warranty
90 days, provided by seller
More Information
| Manufacturer | HP |
|---|---|
| Condition | Refurbished |
| Part Number | Q7832A-RO |
| OEM Part Number | Q7832A |
| Alternate Part Numbers | Q7832-67901, Q7832A |
| Weight | 8.000000 |
| UPC/EAN | 882780506541 |