4200/4300 500 Sheet Stacker
Description / 4200/4300 500 Sheet Stacker
Product Information
HP Q2442B 500-Sheet Output Stacker - Refurbished Outright
Part Number: Q2442B-RO
Condition: Refurbished Outright. No core return required.
Manufacturer / Brand: HP
Refurbished 500-sheet output stacker for HP LaserJet4200 /4250 /4300 /4350 printers with the correct accessory configuration. Collects printed pages at the printer output.
Technical Specifications
| Listed part number | Q2442B-RO |
|---|---|
| Component | 500-sheet output stacker |
| HP product reference | Q2442B |
| HP service reference | Q2442-67902 |
| Output capacity | 500sheets of75g/m2(20lb)paper; capacity varies with paper thickness/environment |
| Stacking media | 60-120g/m2paper;Letter,A4,Executive,Legal,B5(JIS),A5;custom148x210to216x356mm |
| Media routing | Do not route envelopes or card stock to this output accessory |
Commonly Used to Fix
These manufacturer-documented checks are suggested repair paths. Confirm the exact model, operating voltage and failed component before replacement.
| Error code / light pattern | Meaning and applicable printer models | Checks / how this part may fix it |
|---|---|---|
| 13.12.09 | The optional output paper-inlet sensor has remained active too long. The accessory LED blinks amber. HP LaserJet4200 /4250 /4300 /4350 with the correct optional output accessory; confirm its exact part number. | Use HELP and the arrow keys for the indicated jam-clearing instructions. Open the accessory jam-access door, remove all media and close it. Check that the indicated sensor lever and its spring move freely; reseat a displaced spring. Diagnose and correct printer faults first. Replace the correct output accessory only if the error persists after these checks and an accessory fault is confirmed. Inspect inlet sensor PS1101; verify the unit is installed and seated correctly. |
| 13.12.10 | A page did not reach the optional output paper-inlet sensor in time. The accessory LED blinks amber. HP LaserJet4200 /4250 /4300 /4350 with the correct optional output accessory; confirm its exact part number. | Use HELP and the arrow keys for the indicated jam-clearing instructions. Open the accessory jam-access door, remove all media and close it. Check that the indicated sensor lever and its spring move freely; reseat a displaced spring. Diagnose and correct printer faults first. Replace the correct output accessory only if the error persists after these checks and an accessory fault is confirmed. Verify that the printer output-bin deflector works correctly before replacing the accessory. The same condition is recorded as13.12.0A in the event log. |
| 13.12.0A (event log) | Event-log equivalent of displayed13.12.10; not a separate diagnosis. HP LaserJet4200 /4250 /4300 /4350 with the correct optional output accessory; confirm its exact part number. | Use HELP and the arrow keys for the indicated jam-clearing instructions. Open the accessory jam-access door, remove all media and close it. Check that the indicated sensor lever and its spring move freely; reseat a displaced spring. Diagnose and correct printer faults first. Replace the correct output accessory only if the error persists after these checks and an accessory fault is confirmed. Check printer output deflector operation and the accessory inlet path; this is the same condition as displayed13.12.10. |
| 13.12.11 | A jam was detected during accessory power-on. The accessory LED blinks amber. HP LaserJet4200 /4250 /4300 /4350 with the correct optional output accessory; confirm its exact part number. | Use HELP and the arrow keys for the indicated jam-clearing instructions. Open the accessory jam-access door, remove all media and close it. Check that the indicated sensor lever and its spring move freely; reseat a displaced spring. Diagnose and correct printer faults first. Replace the correct output accessory only if the error persists after these checks and an accessory fault is confirmed. Empty the output bin and inspect the complete accessory path. The same condition is recorded as13.12.0B in the event log. |
| 13.12.0B (event log) | Event-log equivalent of displayed13.12.11; not a separate diagnosis. HP LaserJet4200 /4250 /4300 /4350 with the correct optional output accessory; confirm its exact part number. | Use HELP and the arrow keys for the indicated jam-clearing instructions. Open the accessory jam-access door, remove all media and close it. Check that the indicated sensor lever and its spring move freely; reseat a displaced spring. Diagnose and correct printer faults first. Replace the correct output accessory only if the error persists after these checks and an accessory fault is confirmed. Empty the output bin and clear the accessory jam-access area before considering replacement. |
| 13.XX.YY JAM | Manufacturer-documented grouped accessory-jam pattern. Confirm the jam is in this optional output device; the pattern alone does not identify a failed component. HP LaserJet4200 /4250 /4300 /4350 with the correct optional output accessory; confirm its exact part number. | Use HELP and the arrow keys for the indicated jam-clearing instructions. Open the accessory jam-access door, remove all media and close it. Check that the indicated sensor lever and its spring move freely; reseat a displaced spring. Diagnose and correct printer faults first. Replace the correct output accessory only if the error persists after these checks and an accessory fault is confirmed. If no actual jam is visible, inspect inlet sensor PS1101 and delivery sensor PS1102 for a sticking or damaged lever. Replace the accessory only when its own fault remains. |
| 56.2 | An unknown output device is installed. HP LaserJet4200 /4250 /4300 /4350 with the correct optional output accessory; confirm its exact part number. | Turn the printer off and on. Reinstall the stacker or stapler/stacker and remove unsupported non-HP paper-handling devices. Confirm the exact compatible accessory and connector seating; this code alone does not prove the unit is defective. |
| 66.00.15 | The output accessory was removed and replaced while printer power was on. Its LED is off in this documented condition. HP LaserJet4200 /4250 /4300 /4350 with the correct optional output accessory; confirm its exact part number. | Turn printer power off, verify that the accessory is installed correctly and fully seated, then turn printer power on. Correct installation first; this event does not by itself establish a hardware failure. |
| Lower the optional bin | The accessory output bin is raised. The LED blinks amber. HP LaserJet4200 /4250 /4300 /4350 with the correct optional output accessory; confirm its exact part number. | Lower the output bin. If the message persists with the bin correctly positioned, the manufacturer directs replacement of the stacker or stapler/stacker. |
| OUTPUT BIN 1 FULL | The optional output bin is full; its LED blinks amber. HP LaserJet4200 /4250 /4300 /4350 with the correct optional output accessory; confirm its exact part number. | Remove all paper from the bin. If the message persists, verify that the four plastic output flapper paddles move freely. A failed paper-full sensor PS1106 or driver PCA can require replacement of the accessory; an ordinarily full bin does not. |
| OUTPUT PAPER PATH OPEN | The jam-access door or staple-cartridge door is open; the LED blinks amber. HP LaserJet4200 /4250 /4300 /4350 with the correct optional output accessory; confirm its exact part number. | Close the indicated door. If the message persists with the doors correctly closed, inspect door-open switch SW1101 and the accessory driver PCA. Replace the accessory only for the persistent confirmed device fault. |
| LED blinking amber | Accessory attention pattern associated with an output jam, raised/full bin or open paper path; it is not a unique component diagnosis. HP LaserJet4200 /4250 /4300 /4350 with the correct optional output accessory; confirm its exact part number. | Read the printer display, clear the indicated jam, empty or lower the bin and close the correct door. Check sensor/door mechanisms before replacing the unit. Follow the matching exact display-code procedure. |
Other Symptoms This Part May Fix
- Recurring jams where paper enters or leaves the accessory: Correct printer faults first. Check media and environment; after a cold-to-warm move, remove condensation with a dry lint-free cloth or allow10-20minutes powered on before testing. Inspect the feed motor/rollers, inlet sensor PS1101 and delivery sensor PS1102 for free lever/spring movement. Clean dirty rollers, reseat displaced springs and replace the accessory only for a confirmed persistent accessory fault. If the leading edge has not emerged from the printer, inspect the deflector and its printer-side solenoid; a failed printer deflector mechanism requires its own repair.
- Skew or a bent leading edge caused inside the optional output path: Clean contamination from the accessory path, inspect feed guides and clean dirty rollers. If worn rollers or damaged guides in the output device remain, the manufacturer lists accessory replacement. Skew originating in the printer registration or input path is a separate fault.
- No accessory power: With printer power off, inspect and fully seat the unit and its connector. If it was installed while powered on, turn the printer off and on after correct seating. A confirmed defective accessory driver PCA can require replacement of the output device.
- Testing optional-output transport: Select DIAGNOSTICS > PAPER PATH TEST > DESTINATION > OPTIONAL BIN1; select an appropriate COPIES count and PRINT TEST PAGE. Check that the optional output bin is configured in the driver before diagnosing the hardware.
Used In Products
HP LaserJet 4300 series
HP LaserJet 4250 series
HP LaserJet 4350 series
Warranty
90 days, provided by seller
More Information
| Manufacturer | HP |
|---|---|
| Condition | Refurbished |
| Part Number | Q2442B-RO |
| OEM Part Number | Q2442B |
| Alternate Part Numbers | Q2442B |
| Weight | 40.000000 |
| UPC/EAN | 829160306957 |
Write Your Own Review