Lexmark T640 Fuser 110V 40X2591
Description / Lexmark T640 Fuser 110V 40X2591
Product Information
Lexmark T640 Fuser 110V
Part Number: 40X2591
- Part number / SKU: 40X2591
- Part type: Fuser / fusing assembly
- Voltage specified in listing: 110V
Confirm the printer model and exact part number before ordering. Kit contents and service life vary by listing; contact us if you need those details confirmed.
Manufacturer: Lexmark
Commonly Used to Fix
| Lexmark error | Meaning and diagnosis |
|---|---|
| 920.01 | Hot roller takes too long to heat up after entering standby control. Check AC input, lamp, thermistor and wiring before replacing the fuser. |
| 920.02 | Hot roller falls below its desired standby temperature. Check power source and thermal feedback. |
| 920.12 | Hot roller temperature drops too far during printing. The fuser, power delivery or temperature sensor may be responsible. |
| 922.02 | Hot roller takes too long to reach the initial lamp-detection temperature. Check fuser heater, cabling and AC power. |
| 923.01 | Fuser over-temperature condition. Check the thermistor and fuser-control circuit; replacing the fuser alone may not correct controller faults. |
Other possible symptoms include unfused toner, fuser-area jams or fuser roller damage. The error code identifies a diagnostic area, not a guaranteed repair.
Service reference: Lexmark T640/T642/T644 service manual; 40X2591 model compatibility reference.
Used In Products
- Lexmark T640
- Lexmark T640n
- Lexmark T640dn
- Lexmark T640dtn
- Lexmark T640tn
- Lexmark T642
- Lexmark T642n
- Lexmark T642dn
- Lexmark T642dtn
- Lexmark T642tn
- Lexmark T644
- Lexmark T644n
- Lexmark T644dn
- Lexmark T644dtn
- Lexmark T644tn
- Lexmark X642e MFP
- Lexmark X644e MFP
- Lexmark X646e MFP
- Lexmark X646dte MFP
Part Specifications
OEM number: Lexmark 40X2591. This is a fuser assembly for the listed T640/T642/T644 and X642/X644/X646 families. Verify the installed assembly and electrical configuration against the printer before ordering. The existing PPTParts listing identifies the unit as 110V; distributors describe the OEM reference as 100V, so the label on the actual supplied assembly controls.
Warranty
90 days, provided by seller
More Information
| Manufacturer | Lexmark |
|---|---|
| Condition | New |
| Part Number | 40X2591 |
| OEM Part Number | 40X2591 |
| Alternate Part Numbers | 40X2591 |
| Weight | 5.000000 |